Telephone, Telephone

It is one of the most common household appliances in the developed world today. Most telephones operate through transmission of electric signals over a complex telephone network which allows almost any phone user to communicate with almost any other user.

A rotary dial telephone employs pulse dialing, sending electrical pulses corresponding to the telephone number to the exchange. (Most exchanges are still equipped to handle pulse dialing.) Provided the called party's line is not already active or "busy", the exchange sends an intermittent ringing signal (generally over 100 volts AC) to alert the called party to an incoming call. If the called party's line is active, the exchange sends a busy signal to the calling party. However, if the called party's line is active but has call waiting installed, the exchange sends an intermittent audible tone to the called party to indicate an incoming call.

This constitutes a mechanism whereby the phone draws no current when it is on hook, but exchange circuitry can send an AC voltage down the line to activate the ringer for an incoming call. When a landline phone is inactive or "on hook", the circuitry at the telephone exchange detects the absence of DC current flow and therefore "knows" that the phone is on hook with only the alerting device electrically connected to the line. When a party initiates a call to this line, and the ringing signal is transmitted. When the called party picks up the handset, they actuate a double-circuit switchhook which simultaneously disconnects the alerting device and connects the audio circuitry to the line. This, in turn, draws DC current through the line, confirming that the called phone is now active. The exchange circuitry turns off the ring signal, and both phones are now active and connected through the exchange. The parties may now converse as long as both phones remain off hook. When a party "hangs up", placing the handset back on the cradle or hook, DC current ceases to flow in that line, signaling the exchange to disconnect the call.

In modern telephone networks, fiber-optic cable and digital technology are often employed in such connections. Satellite technology may be used for communication over very long distances.

Powered by the line, the transmitter produces an electric current whose voltage varies in response to the sound waves arriving at its diaphragm. The resulting current is transmitted along the telephone line to the local exchange then on to the other phone (via the local exchange or a larger network), where it passes through the coil of the receiver. The varying voltage in the coil produces a corresponding movement of the receiver's diaphragm, reproducing the sound waves present at the transmitter.

For the next half century, the network behind the telephone became progressively larger and much more efficient, but after the dial was added the instrument itself changed little until touch tone replaced the dial in the 1960s.

As of January 2005, up to 10% of telephone subscribers in Japan and South Korea have switched to this digital telephone service. A January 2005 Newsweek article suggested that Internet telephony may be "the next big thing." [1] As of 2006 many VoIP companies offer service to consumers and businesses.

VoIP is also used on private networks which may or may not have a connection to the global telephone network.

Source: Wikipedia > Telephone