Search: Focus:

Use the fields above to enter a search or search/focus. Use the search field to match your desired topic
and use the focus field to refine it.

Airsoft, Airsoft

Because of this interest, manufacturers started to produce realistic looking spring-powered guns. These guns fired several calibers of plastic or rubber BBs, but were eventually standardized into 6 mm and 8 mm sizes. The early spring powered weapons then morphed into gas powered ones, using a variety of systems. The hobby then migrated to North America in the mid 1990s. [1] to be larger and more popular than any other market of airsoft replicas. This is due in large part to the addition of many new AEG manufacturers in Japan, China, Taiwan, as well as many others. Though the origin of the actual game is unknown, it is easy to see that now airsoft has exploded in popularity and has had the highest rise in popularity from 2001 to present time than any other sport in the world.

Several goals or missions may be assigned to each team, along with a basic load-out (i.e., supply) of ammunition, rations, explosives, and radios. MilSim originated in Albany, Oregon, by a team named ATAC, or Advanced Tactics Airsoft Class.

ASTM F1776 standard for paintball goggles: http://www.medem.com/MedLB/article_detaillb.cfm?article_ID=ZZZD5TRRSKC&sub_cat=32 The best overall protection is offered by paintball masks. These masks protect the face, teeth, and ears. Some airsoft masks are made with mesh screens, though there is debate that fragments from lower quality or bio-degradeable BBs may pass through the mesh and enter the eye, although there have been no recorded incidents of such an occurence. Durability Test of Mesh Masks http://www.ampair.net/e107_plugins/content/content.php?content.102 While masks offer superior protection, they can interfere with the use of scopes and in cheaper masks, condensation inside the goggles can reduce visibility.

The magazine is usually removed as well, and the gun fired to clear the chamber. Most fields also require players to leave their guns set to the safety position when they are not shooting, a practice common when using real firearms. In certain countries, such as the Philippines, additional special rules have been adopted. Filipino Airsoft Players (FAP) Standard Rules and Regulations: http://www.filairsoft.com/forum/showthread.php?t=821 All "real steel" firearms, explosives, and bladed weapons are banned at any airsoft battlefield to prevent harmful accidents or confusion between real and simulated weapons. Players are expected to be discreet in transporting their gear and uniforms so as not to alarm the public or police. Pyrotechnic devices may be allowed, but are rarely employed, because of the added danger. When they are allowed there are usually legal limits on the effect of the device, e.g. amount of smoke, volume of sound or brightness of flash.

Some prominent teams have 50 or more players, and are able to send delegations to regional or national events. In the Philippines, there are many amorphous groups of airsoft players loosely organized into "teams" of varying sizes. There have been attempts to create large nationwide organizations of airsofters but these have not succeeded nor persisted in the past.

Some countries have specific restrictions Complete list of Airsoft legal requirements in the world such as maximum muzzle velocity, aka FPS (feet per second), rules against using the trademarks of real firearms, and 'unrealistic' coloring to distinguish them from actual firearms. They are legal throughout the U.S, but restrictions exist in certain cities such as Camden, Newark, NJ, Chicago, IL, New York City and Detroit, MI. The states of New Jersey, Illinois, New York and Michigan, however, do not allow airsoft guns to be used and handled publicly, because of the resemblance to real firearms, although Federal and State laws generally regard airsoft guns as toys and in the United States the muzzle tip must be orange. M15A4 Automatic Electric Gun. In the United Kingdom, airsoft replicas are classified as realistic imitation firearms or RIFs. The sale, manufacture or importation of RIFs are restricted to activities that are exempted or have been granted a defense by the Home Office under the Violent Criminal Reduction Act. Airsoft has been granted a defense and a skirmisher as defined under British law is allowed to purchase, manufacture or import airsoft replicas. Usually, the only accepted method of proving entitlement is to be a member of a site that holds public liability insurance. A scheme set up by UK retailers, called UKARA, recommends that an airsoft site only give membership to a player who has played at least three games over a period of no less than two months. The right to own a RIF is still reserved to over 18's.

An airsoft gun is selected according to the level of performance (battery life, range, rate of fire, accuracy, reliability, customization, magazine capacity, size, and weight) or realism the player requires. Early-generation airsoft guns were mostly "springers." Single action airsoft guns are almost always semi-auto and never auto. Second-generation airsoft guns had gas-powered mechanisms that required either an internal "Flon" (CFC) gas reservoir or an external high-pressure CO2 chamber. AEGs (automatic electric guns, such as assault rifles) are now the most commonly used and have high-capacity rechargeable batteries to operate gearboxes that displace air to propel the BBs.

Green gas is propane gas with a hint of perfume and sometimes silicon lubricant and produces a realistic blowback recoil effect when fired. Recently Airsoft manufacturers have begun producing propane adapters that screw directly onto camping grade propane tanks, allowing players to power their gas guns on pure propane, as a cheaper alternative to "green gas". Each pistol magazine contains a small storage gas cylinder with enough power to propel the 30+ BB projectiles also housed in the magazine. Thus a player can realistically load, fire, and unload an airsoft pistol with similar realism as a "real steel" semi-automatic pistol. A few early-production AEPs (Airsoft Electric Pistols) have been released but these suffer from weaker BB velocities because of the difficulty of fitting a small-enough motor in the housing of a pistol, although the range is sometimes greater than a gas pistol. AEP's often have a higher rate of fire than their gas counterparts.

Newer guns, especially those made in China, have metal external parts. A typical airsoft gun is noticeably lighter than its "real steel" counterpart due to the use of aluminium, alloy, and plastic, though some have weights in them for a more realistic feel. There are smoke caps available for certain airsoft guns for added realism.

In the case of AEG rifles magazines come in either standard (equivalent to the capacity of its real steel counterpart), low-capacity (low caps: 30-80 BBs), mid-capacity (mid caps: 80-150 BBs), or high-capacity (high caps: 200-500+ BBs). These magazines are spring loaded; the high-cap magazines often have a ratchet wheel that can be wound up periodically to force BBs up from the holding chamber of the magazine to the feed chute, due to loose BBs in the reservoir they often make a rattling noise when running or walking. Some airsoft guns have electric-powered box or drum magazines that hold thousands of BBs (up to 5000).

Pellet quality is important, as malformed ones can damage the Airsofts guns parts. Malformed, soiled, or low-grade pellets with seams can also be much more inaccurate - even a small deformity will throw the pellet off course.

In Sweden, for example, it is illegal to wear both rank insignia and Swedish flags on civilian uniforms at the same time. It has become popular among civilians and airsoft players to wear only the upper garment or the pants, but not both.

Many players also use a hydration system. Equipment for real world soldiers is also often used in airsoft games, such as are sights, red-dot scopes, flashlights, picatinny rails, and mock silencers.

One team the 'defenders' must hold a fixed location on the field. The other team the 'attackers' must attempt to completely eliminate the defenders, while the defenders must elininate the attackers. there should be more attackers than defenders Protect the President - Protect the President is a completely unique form of airsoft. Although not very popular due to being a mostly unknown form of playing, it gives each game a prominent objective; making the game extremely fun. The objective of the game is to protect the president (hence the title). At least two teams are formed. Each team chooses a President. From this point on, each team may devise their own strategy, but the objective is always constant. Kill the enemy president while being sure to protect your own. If the president on either team is eliminated, the game is over. Another form of Protect the President is to divide into two teams, a Secret Service and Terrorist Factions. The Secret Service team has an unarmed president or lightly armed, and the terrorist's job is to kill that one person. The Secret Service is to either eliminate the Terrorists or move to a certain safe-zone or Landing Zone on the map.

Source: Wikipedia > Airsoft





QuickyWiki beta

What is QuickyWiki? QuickyWiki blends the depth of Wikipedia with the ease and speed of Cliffs Notes.




More from TRYNT



Sponsors



Powered by Odin Assemble